Like any chain, the beer supply chain relies on each link. Given the world’s current predicament with COVID-19, CO2 is suddenly an issue. Supplies are lower than normal, prices are creeping up, and quality is a concern. According to the Brewers Association, the trade organization representing America’s small and independent brewers, CO2 suppliers have increased prices by about 25% due to reduced supply. Because of the shortage of CO2, more breweries are turning to Nitrogen for many of their processes.
From purging tanks between uses to keeping wort, beer and residual mash from oxidizing and contaminating the next batch of beer, nitrogen is the ideal gas for breweries. Nitrogen can also be used to push beer from one tank to the other, and in the final stages of the brewing process, it’s used to pressurize kegs prior to shipment and final use. If the quality of the product is to be ensured, then it needs to be constantly protected.
N2 for Brew – On-Site Nitrogen Gas Generation for the Brewing Industry
On-site nitrogen gas generation produces a continuous supply of ultrapure, food grade nitrogen from readily available compressed air. When the true costs are accounted for, on-site gas generation is the most economical source of nitrogen. Subsequently, nitrogen gas generators give brewers control over their gas pressure, purity and flowrate and minimize production downtime due to the permanent availability of an on-demand nitrogen supply. So what type of nitrogen generator should you select?
The nitrogen gas generator technology of choice for breweries use a method called pressure swing adsorption (PSA). This technology uses 2 vessels (or 2 sets of vessels) filled with carbon molecular sieve (CMS) to separate compressed air. Oxygen and other waste gases are selectively adsorbed under pressure by the CMS, allowing nitrogen to pass through to the application.
Parker domnick hunter offers different types of Nitrosource generators, but for brewery applications it is usually their standard Nitrosource Nitrogen Generator. The larger models of those generators, like the N2-65 to N2-80 range, are the best switch from CO2. With a complete N2 system using Sullair compressors and Parker Nitrogen generation system reduces particulates (atmospheric dust, rust and pipe scale), microorganisms, oil and water aerosols and water vapor. These particular generators are modular so customers can size for current use but that it is easy to expand as they grow, so there is no need to oversize upfront. Together with substantially lower servicing costs, reduced downtime and a longer working life, it adds up to the most cost-efficient nitrogen supply available.
With over 30 years of experience in the market, and over 50,000 gas generators installed globally, Parker domnick hunter is the first choice for innovative and reliable gas generation technology.
Contact our sales staff at sales@nwpump.com or call 1-800-452-PUMP to learn how we can lower your costs with Parker domnick hunter’s on-site nitrogen gas systems today!
Northwest Pump has been a supplier in Washington, Oregon and Alaska for Metso Outotec’s Slurry Pumps, Cyclone Separation, Slurry Valves & Slurry Piping and Hose Systems for nearly 20 years. Now we are prepared to supply Montana. Metso Outotec’s pumps are a frontrunner in sustainable technologies, end-to-end solutions and services for the minerals processing, aggregates and metals refining industries globally. Northwest Pump is excited to expand our Metso-Outotec’s slurry pumps along the Western Plains.
Metso Outotec’s Orion Series horizontal slurry pumps are a great example that represent the company’s commitment to producing heavy and powerful centrifugal pumps. Orion Series horizontal slurry pumps are robust pumping equipment designed for abrasive slurries. Made for the most arduous industrial slurry pumping applications. The horizontal slurry pumps consists of hard metal lined (HM) and rubber lined (HM) pumps.
Featured Highlights:
– Heavy duty grease lubricated bearings in a sealed cartridge. (Double arrangements available)Double sealed w/ V-ring protected lip seal to ensure reliable operation
– -High power transmission design w/ reduced impeller overhang
– Closing front impeller running clearances (optional double adjustment frame)
– Centrifugal seal arrangement
– Even wear design
– Radial or Partial Mixed flow main vanes
– ANSI/ Metric flanges as required for optional flange configurations (on all HM Pumps)
– Front and back expeller vanes
– Wear Resistant castings
The Orion Series horizontal slurry pumps rank #1 in low total cost, low power consumption, long wear life and reliability in operation.
Reach out to our sales team through sales@nwpump.com or call 1-800-452-PUMP for more information.
Northwest Pump has been a primary distributor for Oberdorfer on the West Coast, and has recently taken on MP Pumps. Gardner Denver is the parent company to both brands and offers a variety of pumps for applications such as agriculture, general industry and Marine. MP Pumps and Oberdorfer by Gardner Denver have been supplying a range of high-quality pumps along with in-depth industry knowledge to customers around the world for years, proving their role as a leader in centrifugal pumps. Learn more on how their pumps can meet your industrial needs.
Oberdorfer and MP Pumps have been committed to designing and developing innovative products to meet the fluid handling requirements of both current and emerging markets. No industry has benefited more from these brands than the Marine Industry. Marine pumps from MP and Oberdorfer centrifugal pumps are ideal in a wide array of Marine applications such a bilge pumping, air conditioning, seawater recirculation, oil change, fuel transfer and more. Many leading marine manufacturers and boat operators have come to rely on MP & Oberdorfer for fuel transfer and conditioning , ballast trimming and oil transfer.
By popular choice, the Flomax series from MP Pumps are commonly used in Marine Applications and are their signature product line. Flomax pumps flows between 100-750 GPM and pressures between 100-230 feet of head. Self-priming and straight centrifugal MP Flomax models come in cast iron, stainless, bronze and aluminum. Options include engine drives, pedestal models and hydraulic drives, and clutch packs.
Northwest Pump carries a complete line of MP Flomax pumps, accessories, repair and replacement parts. For more information about MP Pumps and Oberdorfer by Gardner Denver, please reach out to sales@nwpump.com or call 1-800-452-PUMP.
You can also find Northwest Pump on ShipServ for all you Marine application needs.
As of November 2020, NW Pump has become an official distributor for Atlas Copco portable pumps. Altas Copco is a leading manufacturer of rotating equipment for the Industrial and Construction markets. Recently, the Swedish multinational industrial company introduced a line up of NEW PAC H Range Pumps designed with maximize uptime and extended product lifespan.
Product lineup includes:
-PAC H43C
-PAC H64
-PAC H108
The NEW PAC H Range pumps are used for high-pressure industrial applications such as dewatering, quarrying and surface mining. This pump features its ability to handle liquids containing solids of up to 3.5″ in size, increasing the products lifespan and reducing downtime. These high head centrifugal pumps deliver substantial savings towards operational cost and OPEX (Operational Expenditure).
Pac H Range- Portable Pumps-Side
The PAC H Range series features a maximum head size of 500ft and a maximum flow of up to 6400 US gpm. Corrosion free through a fully protected cross-linked polyethylene fuel cell reduces clean up time. Through a fully protected seal equipped with deflector vanes, your pumps seal life last up to 3 times longer. And with compact proportions, the PAC H range allows for easy transportability with up to 3 units on a regular 48 ft. flatbed trailer.
Atlas Copco PAC H pumps decreases repair time by 30% times compared to other products. Made possible by the pumps hinge kit that includes a swing door that allows easy access to the pump’s internal workings and a single bolt to remove the impeller. Through this compact design, customer’s can be assured they can return to operation in a timely manner.
Pac H Range- Portable Pumps- Front
The New PAC H range is available in four models is the best dewatering solution for a wide range of applications. It’s loaded with innovative design features that can help you save money.
Just check the many benefits and and features the PAC H Range pumps have to offer:
– 3 times longer seal life
– Up to 30% Reduced MTTR
-Up to 3 units on a trailer
-Fuel cell is made out of cross-linked polyethylene; giving it strength and making it temperature and environmental resistant
– No metal oxidation; Cleaner fuel lines and less maintenance
-Reduces condensation, increasing the filter lifecycle
-Max Head up to 500 ft.
-Max flow up to 6400 US gpm
-Up to 3.5 in solids handling
For more information about the Atlas Copco brand, please reach out to sales@nwpump.com or call 1-800-452-PUMP.
We are happy to announce the partnership between Sharpe Mixer and Northwest Pump – providing equipment and engineering services for the advancement in mixing technology. Sharpe Mixers has been a trusted mixing partner since its founding in 1953. The Seattle based manufacturer offers quality engineering, superior products and a wide range of mixer designs.
Sharpe Mixer’s portable stainless steel F-Series stands for optimum sanitary mixers that maintain resistance to deterioration and contamination. This heavy duty portable line is perfect for both small-scale mixing in direct drive alignment where greater shear is required or the gear drive option which is best for larger volumes or higher viscosity fluids.
Sharpe Mixer’s F-Series carries several models including USDA approved stainless steel mixers such as Direct Drive, Gear Drive, and Thrifty mixers. Choose between a clamp, plate, or a flange mount depending on your industries need. The F-Series mixer line has been refined and improved over many years to assure that every component has significant advantages over any other mixers on the market.
F-Series Products we now sell include:
•Direct-drive heavy-duty Portables and F-Series mixers
•Gear-Drive heavy-duty Portables and F-Series mixers
•Thrifty Mixer
Industries include but not limited to:
• Biotech
• Pharmaceuticals
• Food
• Distilling
• Brewing
• Chemicals
• Water and Waste Water
• Biofuels
• Coatings
• And more!
Overall Product Highlights include:
•Direct drive or gear drive
•Commercially available components
•Clamp, fixed or closed tank mounting
•Hyflo hydrofoil
•Available in welded shaft/ impeller assemblies with a no, 4 polish
•Pre-engineered line of USDA approved portable mixers
•Tank sizes up to 5000 gal
•Viscosities up to 15000
Direct-drive Heavy Duty Portable Highlights:
• Standard Nema 56C frame motors are used to assure “off the shelf” availability and a wide range of motor options
• Shaft coupling is protected from corrosion, safely located inside the sealed housing.
• Outboard shaft bearing minimizes whip and vibration.
• A rubber- encapsulated vapor seal protects internal parts
• Alloy mixer housings are powder coated for maximum durability
• Stainless-Steel mounting clamp (guaranteed for life against breakage!)
• Oversize ¾, 1” and 1-1/4” diameter shafts are used for maximum stability and long life
• S.S.316 marine propeller provided standard. Shear discs or other impellers available
Gear Drive Heavy- Duty Portable Highlights:
• Precision helical gearing is hardened and ground for exceptional strength, durability and quiet operation.
• Outboard shaft bearing minimizes whip and vibration
• Wide range of motor options
• Shaft Coupling is protected from corrosion, safely located inside the sealed housing
• Ball and socket mount allows 360 degree rotation and 90 degree vertical adjustments
• Energy –efficient Hyflo 218 impellers pump more for less power. SS316 construction
Thrifty Mixers:
• Adjustable-angle mounting clamp and housing are made of heat-treated aluminum
• Non-proprietary 56C motors. Standard 1-ph models include 10 ft cord with switch and 3- prong plug
• Shaft coupling is enclosed within a protective housing
• SS316 marine propellers furnished standard. Folding blade impellers are available for installation through 2” NPT bungs on barrel mixers
For information on your Sharpe mixer, contact NWP at sales@nwpump.com or call 1-800-452-PUMP.
For 10+ years, Northwest Pump has been a large Sullair distributor in Oregon, Washington, Montana & Northern Idaho. NWP prides itself on only carrying vendors that are top-notch and built to last, and Sullair has always fit that description for us. Their products stand up against tough terrain and some of the best in the industry.
Our Industrial Division started with tank farms and mission critical fueling systems for aviation and marine fuel transfer. Today, we supply pumps, compressors and positive displacement blowers for almost any application.
From clean water, asphalt and slurry, to sewage and chemicals, if it can be pumped, we have the pump to do it. We also provide equipment for compressed air, natural gas, nitrogen generation, and pneumatic conveying. Our knowledge of the industry and trusting relationships with our vendors have given us an edge over our competitors.
Who is Sullair? Sullair has been on the leading edge of compressed air solutions for over 50 years now. They were one of the first to execute rotary screw technology in our air compressors. They made history by teaming up with Dow Chemical to produce one of the industry’s longest-lasting compressor fluids. Now Sullair is part of the Hitachi Industrial Equipment Systems Co., Ltd. compressor portfolio. And other machines are famous all over the world for their legendary durability. As the industry moves forward, Sullair will always be at the forefront with quality people, innovative solutions, and air compressors that are built to last. They have centered our operations around three key pillars: Reliability, Durability, Performance.
If you are looking for a Sullair Distributor in Oregon, Washington, Montana & Northern Idaho, contact our Industrial sales team at sales@nwpump.com or 1-800-452-PUMP. Let us get you setup with your Sullair products today, plus we do installation as well!
